Tuesday 8 December 2015

Frostgrave Scenery Project - The Mausoleum Part 02

With the main structure of the building in place I have moved on to so detailing now.

I spent an evening gluing bricks on to the base and defining edges. I think these add a nice bit of character to the building. On a practical level they also hide the joins and give a bit of extra strength to the whole structure.


On the sides you can see I have added some fine brickwork around the drain/skylights.


The bricks are stuck on in a fairly crude and sometime uneven way. This is intentional and will settle down once I get to the next stage.


I glued the bricks on with a "Hi-Tack" glue, which is similar to PVA but grabs and holds very quickly. This proved great for the brickwork as the bricks stayed where I put them straight away, with no slipping at all.


Once the bricks had dried in place I brushed on a good layer of watered down tiling grout.


This is deal for filling gaps between the bricks (which is more or less what it is designed for anyway). It has a slightly gritty texture which also helps to give a masonry feel to the structure.


Once, dry I will give the whole model a light sanding down with 400grit wet and dry paper, just to even out the texture a little.
I also need to build the stairs for the back door. For a bit of variation I am considering building a slightly rotted wooden stair.


The inside of the mausoleum will be left fairly plain. I may not fix the actual tomb inside, so that i can use the building for more than one purpose, once it is complete.


Next up I will start work on the roof.

4 comments:

  1. Are you going to have statues or other decoration? (removable, of course!)

    ReplyDelete
    Replies
    1. Yes, as well as the columns that will go across the front I have a tomb to go in the centre of the building and i am think that there may be either 2 or 4 statues in there as well...

      Delete

Related Posts Plugin for WordPress, Blogger...